-
14:00
A buffer-gas trap for the NEPOMUC positron beam: optimization studies with electrons
-
Adam Deller
(IPP)
-
14:00
Enhanced air stability of Tin‑Based Perovskite Solar Cells with Quercetin
-
Xiaojing Ci
-
14:00
CREScent: High-Precision Electron Spectroscopy using Cyclotron Radiation Emissions
-
Alberto José Saavedra García
(Atominstitut - TU Wien)
-
14:00
Quantum condensed matter under extreme condition
-
PIKESH PAL
(ülich Centre for Neutron Science JCNS at MLZ)
-
14:00
Investigation on structural, electrical and magnetic properties of Gd3+ doped magnesium ferrite (MgFe2O4) ceramics
-
Sudhanshu Kumar
(Forschungs-Neutronenquelle Heinz Maier-Leibnitz (FRM-II), Technical University of Munich (TUM) and Heinz Maier-Leibnitz Zentrum (MLZ), Lichtenbergstr. 1, D–85748, Garching, Germany.)
-
14:00
High Pressure GISANS for soft matter systems: case study on polymer brush mixtures
-
Apostolos Vagias
(FRM2 / TUM (and ILL))
-
14:00
Computer vision integration into the NICOS
-
Tomáš Červeň
(Charles University)
-
14:00
Six-axis robotic arm driver: Zoning out with Frappy and NICOS
-
Stepan Venclik
(Charles University)
-
14:00
Closed-loop approach for automated instrument tuning and alignment
-
Petr Čermák
(MGML, Charles University)
-
14:00
High-throughput powder diffractometer ERWIN – design, capabilities and opportunities
-
Anatoliy Senyshyn
-
14:00
Silicon detector for neutron beta decay measurements with PERC
-
Manuel Lebert
(Technical University Munich)
-
14:00
In-situ neutron diffraction and electron microscopy to study deformation mechanisms in Ni-based superalloys
-
Ralph Gilles
-
14:00
Residual stresses in bronze matrix composite surface deposits after laser melting injection
-
Michael Hofmann
-
14:00
Influence of process parameters on microstructure and residual stress in alloys produced by additive manufacturing.
-
Michael Hofmann
-
14:00
Mesoporous Film Morphology: Factors and Insights from Sol-Gel Coatings
-
Yanan Li
-
14:00
In situ Grazing-Incidence Small-Angle X-ray Scattering Observation of TiOx Sputter Deposition for Perovskite Solar Cells Application
-
Xiongzhuo Jiang
(TUM School of Natural Sciences)
-
14:00
100 kN Testing Machine for In-Situ Neutron Scattering Experiments
-
Massimo Fritton
-
14:00
Less is more: tiny amounts of insoluble multi-functional microporous additive plays a big role in lithium-ion batteries
-
Ruoxuan Qi
(Technical University of Munich)
-
14:00
Microstructure and texture evolutions of γ-TiAl alloy under hot compression via in-situ diffraction
-
Mohamed KEITA
Weimin Gan
(Helmholtz-Zentrum Hereon)
-
14:00
Enhanced air stability with solid additive EH-P in PBDB-TF-T1:BTP-4F-12 organic solar cells
-
ZERUI LI
(TUM)
-
14:00
Revealing the effect of solvent additive selectivity on formation kinetics in slot-die coated organic solar cells at ambient conditions
-
Jinsheng Zhang
(TUM)
-
14:00
Visualizing the propagation of the neutron spin state at the MIEZE spectrometer RESEDA
-
Roman Lvovich
(RESEDA FRM II)
-
14:00
A prototype for the backscatter detector system of PERC
-
Karina Bernert
(TUM)
-
14:00
SECoP: The Sample Environment Communication Protocol
-
Alexander Zaft
(Forschungszentrum Jülich)
-
14:00
KOMPASS – the polarized cold neutron triple-axis spectrometer optimized for polarization analysis
-
Dmitry Gorkov
(FRM2)
-
14:00
The cold neutron imaging beam line ANTARES
-
Michael Schulz
-
14:00
REFSANS: The horizontal time-of-flight reflectometer with GISANS option at the Heinz Maier-Leibnitz Zentrum
-
Gaetano Mangiapia
-
14:00
The direct geometry cold chopper spectrometer TOFTOF
-
Marcell Wolf
(TUM)
-
14:00
Crystal Structure of Ethylene Carbonate
-
Lea Westphal
(FRM II)
-
14:00
Structure and dynamics in functional polymer films
-
Lucas Kreuzer
(MLZ (FRM II, TUM))
-
14:00
Effect of steady state shear on colloidal gelation
-
Christopher Garvey
(MLZ)
-
14:00
The Macromolecular Neutron Single Crystal Diffractometer BIODIFF for Proteins at the Heinz Maier-Leibnitz Zentrum MLZ
-
Andreas Ostermann
(Heinz Maier-Leibnitz Zentrum (MLZ), Technische Universität München)
-
14:00
SANS-1MAX: Massive Q-Range Upgrade
-
Sebastian Muehlbauer
-
14:00
Aging-related changes in the Lithium Distribution of 18650-type Li-ion batteries
-
Dominik Petz
-
14:00
RESEDA@BOA - or how to successfully build a MIEZE setup in 5 days
-
Johanna K. Jochum
-
14:00
A proposal: The next generation of sample environment magnets for the study of strongly correlated electron systems at MLZ
-
Lukas Beddrich
(Research Neutron Source Heinz Maier-Leibnitz (FRM II))
-
14:00
Tuning the Morphology of Biohybrid β-lg:titania Films with pH for Water-Based and Nanostructured Titania
-
Julian Heger
(TUM School of Natural Sciences, Chair for Functional Materials)
-
14:00
PUMA: Thermal neutron three axes spectrometer
-
Jitae Park
(MLZ, TUM)
-
14:00
Relocation of the cold triple axis spectrometer FLEXX to MLZ, Munich: Larmor diffraction and inelastic scattering
-
Markos Skoulatos
(TUM)
-
14:00
Incorporation and localization of magnetic nanoparticles in printed hybrid thin nanoparticle-diblock copolymer films investigated by GISAXS
-
Christopher Everettt
(TU München, Physik-Department, LS Funktionelle Materialien)
-
14:00
Using polarized $^3$He to probe 3-body interactions
-
Earl Babcock
-
14:00
Towards Polarized Backscattering with High resolution
-
Earl Babcock
-
14:00
Effect of the precursor conformation on the structure of polypeptide single chain nanoparticles (SCNPs)
-
Thu Phuong Le
(Materials Physics Center)
-
14:00
Structural study of polyoxazoline-grafted PMMA amphiphilic copolymers
-
Wenqi Xu
(Technical University of Munich, TUM School of Natural Sciences, Soft Matter Physics Group)
-
14:00
Exploring Metal-Insulation for enhanced quench stability in HTS REBCO tape-based coils: a prototype study
-
Madhu Ghanathe
(Technical University of Munich, Heinz Maier-Leibnitz Center)
-
14:00
Neutron reflectometry with micro-second time resolution
-
Thomas Keller
(MPI for Solid State Research, Stuttgart)
-
14:00
Modelling backscattered positron capture at the coincidence Doppler broadening spectrometer
-
Danny Russell
(FRM2)
-
14:00
Design, fabrication and nano-scale characterization of novel SEI layers
-
Zhuijun Xu
(Technische Universität München)
-
14:00
Broadening the dynamic range of PGAA using a high-efficiency detector array
-
Zsolt Revay
(PGAA)
-
14:00
Operando study on structure-activity relationship between electrolyte components and electrochemical performance for all-solid-state lithium-ion batteries
-
Yingying Yan
(Lehrstuhl für Funktionelle Materialien, Physik-Department, TU München)
-
14:00
ADVANCEMENTS IN SAMPLE ENVIRONMENT AT MLZ
-
Valentyn Rubanskyi
(Forschungszentrum Jülich GmbH)
-
14:00
Exploring Hydration Mechanisms in Poly(N-isobutyramide) and its Isomer, Poly(N-isopropylacrylamide).
-
Morgan Le Dû
-
14:00
Materials Science Diffractometer STRESS-SPEC – current status and developments
-
Michael Hofmann
Weimin Gan
(Helmholtz-Zentrum Hereon)
-
14:00
Influence of Photoswitchable Molecules on the Swelling Behavior of Thermoresponsive Poly(Dimethylacrylamide) Films in Water Vapor under UV-Irradiation
-
David Kosbahn
(TUM E13)
-
14:00
EFFECT OF PEROVSKITE NANOCRYSTAL NUCLEATION SEEDS ON MICROSTRUCTURE AND CRYSTALLIZATION PATHWAYS IN ORGANIC-INORGANIC HALIDE PEROVSKITE THIN FILMS
-
Altantulga Buyan-Arivjikh
(Technical University of Munich, TUM School of Natural Sciences, Department of Physics, Chair for Functional Materials)
-
14:00
Optimization of printed Organic Solar Cells
-
Christoph Lindenmeir
-
14:00
New RF spin flippers for the MIEZE spectrometer RESEDA
-
Pavel Daskalov
-
14:00
HEiDi: Applications and Recent Developments of the Hot Single Crystal Diffractometer
-
Martin Meven
(RWTH Aachen University, Institute of Crystallography - Outstation at MLZ)
-
14:00
Imaging from meV to MeV Neutrons combined with Gamma Imaging at the NECTAR Instrument
-
Adrian Losko
(Technische Universität München, Forschungs-Neutronenquelle MLZ (FRMII))
-
14:00
High resolution spin-echo spectroscopy and Larmor diffraction at TRISP
-
Thomas Keller
(MPI for Solid State Research, Stuttgart)
-
14:00
Self-assembly of thermo- and photo-responsive diblock copolymers
-
Peiran Zhang
(Technical University of Munich, Physics Department, Garching, Germany)
-
14:00
Template-Induced Growth of Sputter-Deposited Gold Nanoparticles on Ordered Porous TiO2 Thin Films for Surface-Enhanced Raman Scattering Sensors
-
Suzhe Liang
(Physical Department, TUM)
-
14:00
Comparison of dcMS and HiPIMS Gold Deposition on Polystyrene, Poly-4-vinylpyridine and Polystyrenesulfonicacid
-
Yusuf Bulut
-
14:00
Enhancement of a chemical hydrogen storage system by a catalyst
-
Anastasiia Kuznetsova
(HZG)
-
14:00
Improved surface passivation of AgBiS2 quantum dots for photovoltaic applications
-
Petar Lovric
(TUM)
-
14:00
Hybridizing plasmonic nanostructures with Quantum Dots
-
Kyriaki Nektaria Gavriilidou
-
14:00
A physicochemical study on the role of LPS and CPS on the Lung Surfactant properties
-
Noemi Gallucci
(University of Naples Federico II)
-
14:00
Biopolymer-Templated Deposition of Hierarchical 3D-Structured Graphene Oxide/Gold Nanoparticle Hybrids for Surface-Enhanced Raman Scattering
-
Yingjian Guo
(Deutsches Elektronen-Synchrotron DESY)
-
14:00
Correlating thermoelectric performance with nanostructure of conductive polymer blended with lignin
-
ANURADHA ANURADHA
(Deutsches Elektronen-Synchrotron, DESY)
-
14:00
Concept of an *active learning-assisted* measurement using multiplexing setup at a three-axes spectrometer
-
Avishek Maity
(Jülich Centre for Neutron Science (JCNS) at Heinz Maier-Leibnitz Zentrum (MLZ), Forschungszentrum Jülich GmbH, Lichtenbergstraße 1, 85747 Garching, GERMANY)
-
14:00
Operando neutron diffraction experiments in order to investigate the lithiation and ageing mechanism of industrial scale multi-layer 5 Ah pouch cells with LiNi0.8Co0.15Al0.05O2 cathodes and silicon anodes
-
Thien An Pham
-
14:00
Interface stability of active layers on conductive nanopaper for organic thin-film photovoltaics
-
Stephan Roth
(DESY / KTH)
-
14:00
Similar time-dependent morphology evolution of titania films from different precursors
-
Guangjiu Pan
(Technical University of Munich)
-
14:00
Automated sample loading using Panda cobot from Franka Emika
-
Konstantin Kholostov
(Forschungszentrum Jülich GmbH)
-
14:00
Automated sample change systems for thermal powder diffractometers
-
Christoph Hauf
-
14:00
Optimization of the in-line SEC-MALS at the Small-Angle Neutron Diffractometer KWS-2
-
Jia-Jhen Kang
(Jülich Centre for Neutron Science (JCNS) at Heinz Maier-Leibnitz Zentrum (MLZ))
-
14:00
Fabrication and Characterisation of Cesium- Formamidinium Lead Iodide Perovskite Quantum Dot Layers
-
Thomas Baier
(TU München, Physik-Department, LS Funktionelle Materialien)
-
14:00
Design, construction, and commissioning of a levitated dipole trap for electron-positron pair plasma studies
-
Alexander Card
(Max-Planck-Institut für Plasmaphysik)
-
14:00
Devices for Correcting Phase Aberration for Longitudinal MIEZE at RESEDA
-
Luke Jatho
(FRM2 - RESEDA)
-
14:00
MARIA – The high-intensity polarized neutron reflectometer of JCNS
-
Alexandros Koutsioumpas
(JCNS)
-
14:00
Advancing the Fundamental Understanding of Novel Superalloys through Neutron and Synchrotron Radiation Studies
-
Steffen Neumeier
(Friedrich-Alexander-Universität (FAU) Erlangen-Nürnberg)
-
14:00
KWS-3 very small-angle neutron scattering focusing diffactometer at MLZ
-
Vitaliy Pipich
(Jülich Centre for Neutron Science JCNS at Heinz Maier-Leibnitz Zentrum MLZ Forschungszentrum Jülich GmbH)
-
14:00
Adding functionality to cellulose thin films for photovoltaic applications
-
Xinyu Jiang
(DESY)
-
14:00
New options on the polarized neutron single crystal diffractometer POLI at MLZ
-
Jianhui Xu
(RWTH Aachen, JCNS)
-
14:00
Green Solvents in Organic Solar Cells and their Influence on Performance and Stability
-
Lukas Spanier
-
14:00
Comparative Analysis of Reactivity of Al and Ga Doped Garnet Solid State Electrolyte at the Interface with Li Metal
-
Neelima Paul
(Technical University of Munich, Heinz Maier-Leibnitz Zentrum (MLZ))
-
14:00
Thermal and structural stability of lithiated graphite battery anodes
-
Tobias Hölderle
-
14:00
Renewal concept TOFTOF
-
Marcell Wolf
(TUM)
-
14:00
The Data Evaluation Group DEVA at MLZ
-
Neelima Paul
(Technical University of Munich, Heinz Maier-Leibnitz Zentrum (MLZ))
-
14:00
KCl modulated D2O Hydration and Subsequent Thermoresponsive Behavior of Poly(sulfobetaine)-Based Diblock Copolymer Thin Films
-
Peixi Wang
(Workgroup Polymer Interfaces, TUM Department of Physics, Technical University of Munich)
-
14:00
Electrodeposited Lithiophilic Nanoparticles As Artificial Interphase for Anode-Free Lithium Ion Batteries
-
Gilles Moehl
(ADVMAT)
-
14:00
Diffraction computed tomography with X-rays and neutrons
-
Vladislav Kochetov
(TUM)
-
14:00
Positronium Formation on Polymers Studied by Low-Energy Positrons
-
Maximilian Suhr
(Heinz Maier-Leibnitz Zentrum (MLZ), Technische Universität München)
-
14:00
Effect of pressure on the micellar structure of PMMA-b-PNIPAM in a water/methanol mixture
-
Pablo Alvarez Herrera
(Technical University of Munich)
-
14:00
Status Report of the MEPHISTO Beamline
-
Jens Klenke
(FRM II)
-
14:00
An indirect spectrometer of type Mushroom for the FRM II
-
Ran Tang
(Technische Universität München)
-
14:00
Core-shell Nanoparticles for Wet-coated Surface-enhanced Raman Scattering (SERS) Application
-
Jungui Zhou
(DESY)
-
14:00
BornAgain - open-source cross-platform software to simulate & fit GISAS & reflectometry
-
Mikhail Svechnikov
(FZ Jülich)
-
14:00
Slot-die coated cellulose colloid layer
-
Constantin Harder
(DESY)
-
14:00
QtiSAS: SANS data analysis and reduction software
-
Konstantin Kholostov
(Forschungszentrum Jülich GmbH)
-
14:00
High-resolution powder diffractometer SPODI
-
Markus Hoelzel
-
14:00
Investigation of the Structure of Organic Solar Cells for Space Application and Degradation Due to Mechanical Stress
-
Jan Darsow
-
14:00
Status of the datacatalogue at MLZ
-
Bjoern Pedersen
(Forschungs-Neutronenquelle Heinz Maier-Leibnitz(FRM II), TU München)
-
14:00
First automatically coaligned crystals for inelastic neutron experiments
-
David Sviták
(Matematicko-Fyzikální fakulta univerzity Karlovy)
-
14:00
The Stress and TExture CAlculator software tool
-
Christian Trageser
(Forschungszentrum Jülich)
-
14:00
In situ GISAXS investigation of sputtering IZO thin film for optoelectronic applications
-
Huaying Zhong
-
14:00
Electric Field-Induced Assembly in Highly Crosslinked Ionic Microgels
-
BRIJITTA JOSEPH BONIFACE
(MLZ, FRM II)
-
14:00
Impact of the Environment on the PNIPAM Dynamical Transition Probed by Elastic Neutron Scattering
-
Benedetta Petra Rosi
(Forschungszentrum Jülich)
-
14:00
Sample Environment @FRM2: latest developments and new equipment
-
Manuel Suarez Anzorena
(Forschungs-Neutronenquelle Heinz Maier-Leibnitz (FRM II))
-
14:00
Enhanced stability with Ni2+ addition-based perovskite solar cells by slot-die-coating
-
Zhaonan Jin
-
14:00
Neutron and synchrotron diffraction studies to understand the mechanism and the influence of hydrogen on the microstructure of superalloys.
-
Alexander Mutschke
-
14:00
Investigation of radiation exposure on organic solar cell for space application
-
Tarek Azzouni
(Technical University of München)
-
14:00
The JCNS polarized 3He group
-
Earl Babcock
zahir salhi
(JCNS)
-
14:00
Fractal scaling of Dairy gels: A rheology and neutron scattering study
-
Ramya Koduvayur Ananthanarayanan
(Post doctoral fellow, TUM Garching)
-
14:00
In situ GISAXS printing of biotemplated titania nanostructures
-
Linus Huber
(TU München)